TriggerFoam Pro is a one part polyurethane expanding foam with an extended temperture range which sets into its final form by using moisture present in the air. When installing the foam, consideration should be given to the 2-3 times expansion of the foam after it leaves the nozzle. Thesurface of the foam initially dries within 1-4 hours and becomes fully cured in 12-15 hours. Extended application temperature range allows use at temperatures as low as 23 F (-5 C). May be used at 14 F (-10 C) if can is stored at 77 F (25 C) for 8 hours before use. TriggerFoam Pro sets well on ordinary surfaces such as concrete, brick, metal, etc. Surfaces do not require preparation and can also be damp. After installation, it is recommended that a full 24 hours elapse prior to scraping, sanding, staining or painting. The foam has a R-5 equivalent value when used in place of traditional installation methods.

Features

• CFC free propellant
• Class B2 Flame retardant
• Physiologically harmless when fully cured
• Contains no urea formaldehyde or PCB's
• Does not rot or deteriorate with ageLow odor
• High foam yield – up to 1.8 ft 3 per 29 oz. can
• Easily adjustable applicator can dispense foam beads as small as 1/8"
• Hardened steel dispenser tip for longer life on metal tool
• Precision plastic valve helps prevent pressure loss and prolongs shelf life
• Stop and go application product remains liquid in applicator until dispensed
• Minimal subsequent expansion (± 10%)
• Compatible with PVC
• VOC: 157 g/L

29 oz can